Frame-Pack

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period.

Volume

4 L 6 L

SKU: F9973

In stock – Delivery time: 2-3 business days

5 year

5-Year Warranty

ORTLIEB-Warranty

The ORTLIEB warranty, limited to five years, is a voluntary warranty provided by the manufacturer. It grants additional rights independent of the rights granted by consumer protection laws. Should a product be replaced within the warranty period, the date of first delivery continues to apply to the five-year warranty period.

This worldwide, free of charge warranty of five years from delivery refers to material defects and processing errors. Scuff marks, holes and cracks caused by the customer's own fault are not covered by the warranty. Claims for defects due to normal wear and tear, improper use, non-observance of the assembly instructions, third-party intervention as well as due to improper storage are excluded. No warranty is given for damage due to improper care and improper use. As a rule, however, such damage can be repaired at cost price.

Consumer Protection Law

Important: The provisions of the ORTLIEB warranty, which is limited to five years, do not apply to claims arising from statutory consumer protection rights. These statutory rights are not limited by the warranty. Thus, the benefits under the five-year limited ORTLIEB warranty are intended to supplement and not replace the rights granted by consumer protection laws.

If a product is defective, consumers may in particular claim the rights under §§ 434 et seq., §§ 474 et seq. of the German BGB (German Civil Code). Consumers can choose whether to claim performance under the ORTLIEB warranty, which is limited to five years, or under their statutory consumer protection rights.

The first point of contact for warranty claims is always the specialist or online dealer with whom the purchase contract for the product was concluded. This warranty is subject to the laws of the Federal Republic of Germany.

Status: July 2022

Free

125 €

Tax included.

For orders over €120, we'll sponsor 1 m² of rainforest for free. Find out why and how it works here

Frame-Pack

125 €

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves and food supplies. The proven, waterproof nylon fabric and the waterproof Tizip zipper (updated version) ensure that your things remain absolutely dry even in the most inclement of weather. Mounting the Frame-Pack with the ultra-strong hook and loop straps to the top tube, seat tube and down tube is a snap. The Frame-Pack is suitable for mounting on carbon frames and available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

Specifications

Height

24 cm

Width

40 cm

Depth

6 cm

Volume

4 L

Load

3 kg

Weight

200 g

SKU

F9973

Waterproof

Yes ()

IP Ratings

The IP rating is an international standard that indicates how well a product is protected against dust and water.

The Frame-Pack meets the IP67 protection rating:

Even if the Frame-Pack falls into the water, the contents stay perfectly dry. This means you can rely 100% on your gear during expeditions to unknown places or water sports.

All protection ratings at a glance

IP67

The product is dust-tight and protected against temporary immersion (up to 1 m for 30 min.).

IP64

The product is dust-tight and protected against splashing water from all directions.

IP54

The product is dust-protected and protected against splashing water from all directions.

IP53

The product is dust-protected and protected against spraying water up to 60° from vertical.

Material

PU-coated Nylon (PS21R, PS33)

Downloads

Instruction
Datasheet
Template

Scope of delivery

1x frame bag
3-4x hook and loop straps for attachment (size 4 L: 3 straps , size 6 L: 4 straps)

Spare parts

Hook and loop straps for Frame-Pack

Warnings and safety information

Risk of injury due to material breakage if overloaded! Do not exceed the maximum payload of 3 kg. If necessary, weigh your load to ensure that you do not exceed the maximum payload.

Manufacturer information

ORTLIEB Sportartikel GmbH
Rainstraße 6
91560 Heilsbronn
Germany
deinservice@ortlieb.com

Frequently Asked Questions

Can I mount the Frame-Pack on a carbon frame?

Yes, the Frame-Pack can also be mounted on carbon frames. We recommend applying protective film at the contact points to avoid abrasion and damage.

How compatible is the Frame-Pack with different bicycle frames?

The Frame-Pack can be easily attached to most bicycle frames thanks to its variably positionable hook-and-loop fasteners. The robust, high-grip straps are simply fixed to the top tube, seat tube, and down tube and can be individually adjusted or shortened. To check whether the Frame-Pack in your desired size fits your bike, you’ll find a printable template in the “Downloads” section. Cut it out and place it on your frame triangle to see immediately whether the bag fits perfectly.

Should I choose the roll-top or zipper version of the ORTLIEB Frame-Pack?

Both closure variants are waterproof and designed for tough bikepacking use, but differ in their IP waterproof rating, handling, and access to contents. The zipper version allows particularly quick access, ideal if you frequently need tools or food on the go. The roll-top version offers a larger opening and makes loading and unloading easier, especially with bulky gear like tent poles or cookware.

How securely does the Frame-Pack sit on the bike during rides on rough terrain?

The Frame-Pack sits firmly in the frame triangle thanks to its strong hook-and-loop fasteners and remains stable even on rough trails. The wide straps ensure a non-slip hold on different frame shapes. Even with heavy loads or vibrations, nothing wobbles and the bag stays perfectly in place.

Where is the Frame-Pack manufactured?

The Frame-Pack is manufactured in Heilsbronn, Germany, standing for genuine “Made in Germany” quality. Every production step, from material cutting to final inspection, takes place in our own facilities. Materials are sourced locally, regionally, or internationally according to strict requirements. Our high standards for raw materials extend the product’s lifespan and conserve resources.

More about Made in Germany

Is the Frame-Pack worth the price?

ORTLIEB products stand for durability and repairability. The Frame-Pack is manufactured in our factory in Heilsbronn, Germany. We source materials locally, regionally, or internationally depending on what meets our high standards. We invest time in development to ensure the functionality of every detail.
Thanks to long-lasting materials, the bag is a reliable companion. Its lifespan puts the purchase price into perspective, especially since we offer a five-year warranty on our products. A wide range of repair and upgrade options further improves the price-performance ratio.
Repair before replacement: Every product is designed to be easy to repair and can, in most cases, be serviced by our Customer Service team in Heilsbronn. This extends its lifespan and conserves resources.